Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
NOTE:
The battery has to be inserted with
correct polarity (+ and –). The plus
terminal has to face downwards.
˜ Preparing the product
1. Turn the locking screw
(Fig. C). The locking screw
2. Clean the scale
1 ]
[
tip
with a dry cloth. Otherwise, faulty
7 ]
[
measuring results may occur.
3. Check that the buttons and the LC display
work correctly.
14 GB
anti-clockwise
3 ]
[
loosens.
3 ]
[
and the depth measuring
˜ Operation
˜ Measuring
NOTE: If the product is not in use for more
than 5 minutes, the product automatically
switches off.
1. Switch on the product: Press the on/off button
.
9 ]
[
2. Turn the locking screw
(Fig. C). The locking screw
Measuring on a flat surface
3. Place the foot with magnet
[
10 ]
surface. Slide down the product to the lower
end of the scale
anti-clockwise
3 ]
[
loosens.
3 ]
[
on a flat
8 ]
[
. Continue with step 6.
1 ]
[
Werbung
Inhaltsverzeichnis
