Parkside HG07773A Bedienungs- Und Sicherheitshinweise Seite 13

WEAR PROTECTIVE
GLOVES! Leaked or
damaged batteries/
rechargeable batteries can
cause burns on contact
with the skin. Wear suitable
protective gloves at all times
if such an event occurs.
˜ Before first use
˜ Inserting/replacing battery
NOTES:
Flashing numbers indicate a discharged/flat
battery.
When changing the battery, the LC display
may experience faults.
– Remove the battery from the battery
holder .
[ 2 ]
– Wait for approx. 30 seconds.
– Insert the battery again in the product.
– If necessary, repeat the above steps again.
1. Pull out the tab on top of the LC display
take out the battery holder
2. If necessary, remove the old battery from the
battery holder
2 ] [
3. Insert the new battery into the battery
holder .
[ 2 ]
4. Push the battery holder
(Fig. B).
2 ] [
.
back in carefully.
2 ] [
GB
10 ] [
to
10 ] [
13