Zodiac eJET 450 Bedienungsanleitung Seite 25

IV-5 THRUST REVERSER FLAP
Check the thrust reverser flap is operating properly by using the tilt buttons on the remote throttle.
NOTE : see Torqeedo's user Manual, chapter System Start.
Press the tilt down button
Press the tilt up button
IV-6 STEERING WHEEL
Make sure that the steering wheel is properly tightened. Turn it fully to the left and to the right to
check that it operates freely and without hindrance.
Also make sure that the propulsion outlet changes direction at the same time as the steering wheel
and that there is no dead time between the steering wheel movement and the propulsion outlet.
IV-7 COOLING SYSTEM
Check that the pump filter is cleaned.
For testing the pump, set the Cooling Policy to immediate and check that the pumps are running.
During a trip, the Cooling Policy has to be set on Normal mode if the water temperature is above 28°C.
If not, the Cooling settings have to be changed on Early mode.
NOTE : see Torqeedo's user Manual, chapter Settings.
INSPECTION BEFORE USE – Thrust reverser flap
The thrust reverser flap moves down
The thrust reverser flap moves up
Page 24 / 47