Heat Index; Dew Point; Weather Alert - Renkforce 2377869 Bedienungsanleitung

Wind chill
8
The wind chill factor is based on the common effects of the outdoor sensor's temperature and wind speed data.

Heat index

9
The heat index is determined by the outdoor sensor's temperature & humidity data.
Heat index range
27 °C - 32 °C (80 °F - 90 °F)
33 °C - 40 °C (91 °F - 105 °F)
41 °C - 54 °C (106 °F - 129 °F)
≥ 55 °C (≥ 130 °F)
Heat index is only calculated when the outdoor temperature is between 27 °C (80 °F) and 50 °C (120 °F).

Dew point

10
The dew point temperature is determined by the temperature & humidity data from outdoor sensor.
The dew point is the temperature below which the water vapor in air at constant barometric pressure con-
denses into liquid water at the same rate at which it evaporates. The condensed water is called dew when
it forms on a solid surface.
UV index and light intensity calibration
11
1. When the UV index reading is shown, press and hold the INDEX button for 2 seconds to enter the UV index
calibration mode.
2. Use the or buttons to adjust the UV gain value. (Default is 1.0)
3. Press the INDEX button again to enter the light intensity calibration mode.
4. Use the or buttons to adjust the light intensity gain value. (Default is 1.0)
5. Press the INDEX button to save.
i) Weather alert
Weather Alert can alert you of certain weather conditions.
Once the alert criterion is met, the alarm sound will activate
and the alert icon and the reading will flash.
To set the alert:
1. Press the button (Alert) to enter the alert setting mode.
2. Press the or buttons to select the section: Indoor → Outdoor → CH1 → CH2 → CH3.
56
Warning
Caution
Extreme Caution
Danger
Extreme Danger
Explanation
Possibility of heat exhaustion
Possibility of heat dehydration
Heat exhaustion likely
Strong risk of dehydration / sun stroke
Flashing
reading