Intended Use; Delivery Content - Renkforce 2377869 Bedienungsanleitung

3. Intended use

The weather station serves to display different measuring values, e.g., the indoor/outdoor temperature and humidity,
barometric pressure, rainfall, wind speed and direction, UV index and light intensity.
The data measured by the outdoor sensor are wirelessly transferred to the weather station.
Furthermore, the weather station calculates a weather forecast and displays it using graphical symbols on the display.
Time and date are set automatically by the DCF time signal, manual setting is possible in case of reception problems.
Furthermore, a wake-up alarm with snooze function is integrated.
Power is supplied to the weather station via the mains supply unit included in delivery. Power is supplied to the outdoor
sensor via batteries (not included).
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product for purposes
other than those described above, the product may be damaged. In addition, improper use can result in short circuits,
fires, electric shocks or other hazards. Read the instructions carefully and store them in a safe place. Make this prod-
uct available to third parties only together with its operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.

4. Delivery content

• Main unit
• Table stand of main unit
• Sensor
• Mounting pole for sensor
• Mounting base for sensor
• Mounting clamp for sensor
• 4x Screws (mounting clamp)
• 4x Nuts (mounting clamp)
Up-to-date operating instructions
1
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
• 4x Washers (mounting clamp)
• 2x Rubber pads (mounting clamp)
• 2x Screws (mounting pole)
• 2x Nuts (mounting pole)
• CR2032 battery
• Adaptor
• Operating instructions
37