Intended Use; Scope Of Delivery - Renkforce 1414020 Bedienungsanleitung

3. Intended use

The weather station serves to display different measuring values, e.g. the indoor/outdoor temperature and
the indoor/outdoor air humidity, barometric pressure, rainfall, wind speed and wind direction.
The data measured by the outdoor sensor are wirelessly transferred to the weather station.
Furthermore, the weather station calculates a weather forecast for the next 12 - 24 hours using an internal
air pressure sensor and recording the changes in air pressure, which is then indicated on the display with
graphic symbols.
Time and date are set automatically by DCF signal; manual setting is possible as well if there are reception
problems. Furthermore, a wake-up function with snooze mode ("Snooze") is integrated.
The power supply of the weather station and the outdoor sensor takes place via three batteries of type AA/
mignon each.
The safety notes and all other information in these operating instructions always have to be observed.
Any other use than that described above is not permitted and will damage the product. Additionally, this is
connected to dangers, such as short circuit, fire, etc.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.

4. Scope of delivery

• Radio-controlled weather station
• Foot
• External sensor
• 4x screws
• 4x washer
• 4x nuts
• Pole clamp
• Operating instructions
Up-to-date operating instructions:
1. Open www.conrad.com/downloads in a browser or scan the displayed QR code.
2. Select document type and language and enter the item number into the search
field. After submitting the query you can download displayed records.
44