Installation: Ocm Elp - Zumtobel NBOX Montageanleitung

4.4

Installation: OCM ELP

The nBox system is delivered with one nBox OCM ELP module and can be expanded to up to 4 nBox OCM ELP
modules.
DANGER
Danger of electrocution!
w
When mounting and installing the device, the voltage supply must be disconnected and the
battery fuse removed.
Connecting the nBox OCM ELP
Note
i
The nBox has 4 slots for nBox OCM ELP under the terminal block (for more information see
Section Your nBox system
nBox, Installation instructions 1.0 | 02.2021 | en
, no. 5). One slot is already in use upon delivery.
6
1. Touch the earthing bar to divert any existing electrostatic
charge from the human body.
2. Pull the cover out to the right.
3. Insert the nBox OCM ELP in the next available slot. Push the
nBox OCM ELP into the slot until it audibly clicks into place.
4. Reinsert the cover.
Mounting and installation
21