Preparatory Measures - Zumtobel NBOX Montageanleitung

Preparatory measures

Mounting holes in the nBox are used for mounting the system. To mount and connect the nBox system, the
mounting holes must first be accessible:
nBox, Installation instructions 1.0 | 02.2021 | en
1. Remove the cover on the front.
2. Switch off the mains switch.
3. Remove the battery fuses on the recharging device. To do this,
loosen the fuses by twisting left (1) and pull out (2).
4. Loosen the screw on the AC module.
Mounting and installation
15