Mounting The Nbox - Zumtobel NBOX Montageanleitung

4.2

Mounting the nBox

Note
i
If the cables are going to be routed into the housing through the cut-out in the back of the nBox, all
cables must be laid correctly before the nBox is mounted.
Mounting dimensions for the nBox S
Figure 7: Mounting dimensions for the nBox S
nBox, Installation instructions 1.0 | 02.2021 | en
Mounting
Spacing of horizontal
mounting holes (top)
Spacing of vertical mounting
holes
Number of mounting holes
Table 10: Mounting holes for the nBox S
Note
i
·
In order to have the terminals at a
comfortable working height, the top
mounting hole should be placed at a height
of 1,650 to 1,700 mm.
·
There must be at least 50 mm distance to
the wall on the right and at least 150 mm
distance to the wall on the left in order to
ensure adequate cooling of the device.
When calculating the load-bearing capacity of the walls,
use the information provided in Section
information .
14
Mounting and installation
Directly on the wall
220 mm
330 mm
3
Weight
17