The Bilge Pump System Is Not Designed To Keep In Check Water - Zodiac MEDLINE 9 Bedienungsanleitung

V-5-2 Bilge pump
USE
The bilge pump is not wired to the battery switch and operates independently; the switch
always connected.
Automatic operation (fixed position): in this position the bilge pump works automatically. The pilot
light is on.
When at anchor, even for several months, it is normal that the bilge pump indicator is on. A pilot
light will not empty your battery.
 Stop: in this position (set position), the bilge pump is off. The pilot light is off.
This position should almost never be used, except when the boat is out of the water and sheltered.
 Forced operation: the switch has to be held depressed to operate it. As soon as you release the
switch, it returns to automatic position (1).
INSTALLATION AND CIRCUIT
ZODIAC recommends the use of a tarpaulin or mooring cover in order to
prevent water ingress in the event of rain.
Ensure that the system is in working order (unblocked pipes, plugs out, bilge
pump switch on automatic mode, battery charged).
WARNING
AT ANCHOR, SET THE BILGE PUMP SWITCH TO THE AUTOMATIC
STARTING POSITION.
WARNING!!!

THE BILGE PUMP SYSTEM IS NOT DESIGNED TO KEEP IN CHECK WATER

COMING FROM A BREACH IN THE HULL, IT IS THE OWNER'S
RESPONSIBILITY TO HAVE AT LEAST ONE BAILER ON BOARD WITH A
SYSTEM TO PREVENT ITS ACCIDENTAL LOSS.
Page 48 / 63
is
Issue 4