Inserting The Carafe  Configuration A - Saeco Kuhlkaraffe Bedienungsanleitung

INSERTING THE CARAFE  CONFIGURATION A
8
1
A
B
B
D
A = Carafe holes
B = Carafe pins
C = Machine couplings
D = Guides for carafe pins
4
Insert the carafe by turning it towards the base through a round movement (as shown
in the fi gure), until it is hooked to the hole (E) located in the drip tray.
DO NOT FORCE THE INCLINATION OF THE CARAFE.
REMOVING THE CARAFE
The following operations show how to
properly remove the carafe from the
machine.
DO NOT FORCE THE
INCLINATION OF THE CARAFE.
After use remove the container from the machine and place it in the refrigerator for proper conservation.
Store the milk according to producer's instructions and do NOT use it after best-before date.
Wash the container as described in the "MILK CARAFE CLEANING" section (see page 12).
2
C
Insert the carafe inclined towards
the front. The carafe base should be
positioned on the hole (E) located on the
drip tray.
1
Pull the carafe upwards until its release from the hole (E) located in the drip tray. Then
pull until it releases.
3
C
A
D
B
At this stage the carafe holes (A) are
lower than the couplings (C).
The carafe pins (B) are located at the
same height of the guides (D).
5
E
The carafe will be naturally back in
place.
2
B