REPLACING THE FITTING
This is necessary in order to use the thermal carafe for machines fi tted with the cylindrical fi tting connection (B) specifi ed in the previous
section.
1
Release the handle by rotating it
clockwise.
4
Rotate the handle counter-clockwise to
the unlock position.
7
Remove the hose from the external
fi tting.
2
Release the cover by rotating it clockwise.
Note: See screen printing on the side
of the carafe.
5
Remove the external fi tting cover that
comes into contact with the machine.
8
Remove the external rubber fi tting by
pulling it.
Store the parts you have just removed in a clean, dry place.
3
Raise the cover from the base.
6
Remove the handle with the suction
hose.
9
W
Remove the parts to be replaced.
W = external cylindrical connection cover
Z = external cylindrical connection fi tting
5
Z