Installation - Saeco Kuhlkaraffe Bedienungsanleitung

INSTALLATION

4
INSTALLATION OF CARAFE SUPPORT FOR DRIP TRAY
Before using the thermal carafe, you will need to install the support supplied with the kit. This allows for the correct use of the carafe.
Important note: This new support is also compatible with the standard carafe; once installed it must not be removed.
1
Remove the drip tray from the machine
and empty its contents.
4
Insert the support supplied with the kit.
A
If the machine is fi tted with the connection
with white pins, the carafe is ready for
immediate use (see pages 7 and 8).
2
Remove the grill and wash it thoroughly.
5
Replace the grill.
Once this phase is complete, check which fi tting is on the machine.
This is important for the correct confi guration of the thermal carafe.
3
Remove the old support in the drip tray
and wash the tray.
1
Position the tray in the machine.
B
If the machine is fi tted with the
cylindrical pin connection, you will need
to replace the fi tting on the carafe with
that supplied in the kit (see page 5).