Spray Gun; Attaching And Removing The Nozzle - Stihl RE 80.0 Gebrauchsanleitung

English
6.3 Attaching and removing the

spray gun

6.3.1 Attaching the spray gun
1
2
► Slide the connector (2) into the spray gun (1).
The connector (2) engages with an audible
click.
► If the connector (2) cannot be easily pushed
into the spray gun (1): Grease the gasket on
the connector (2) with grease for fittings.
6.3.2 Removing the spray gun
2
► Press and hold the locking lever (1).
► Pull out the connector (2).
6.4 Attaching and removing the
spray lance
6.4.1 Attaching the spray lance
2
► Push spray lance (1) into spray gun (2).
► Twist the spray lance (1) until it engages.
► If the spray lance (1) cannot be pushed easily
into the spray gun (2): Grease the gasket on
the spray lance (1) with grease for fittings.
36
1
1
6 Assembling the pressure washer
6.4.2 Removing the spray lance
2
1
► Squeeze spray lance (1) and spray gun (2)
together and twist as far as they will go.
► Pull spray lance (1) and spray gun (2) apart.
6.5 Attaching and removing the
nozzle
6.5.1 Attaching the Nozzle
2
► Push nozzle (1) onto the spray lance (2).
► Turn the nozzle (1) until it engages
► If the nozzle (1) cannot be pushed easily into
the spray lance (2): Grease the gasket on the
nozzle (1) with grease for fittings.
6.5.2 Removing the nozzle
2
► Press nozzle (1) and spray lance (2) together
and turn until stop.
► Pull nozzle (1) and spray lance (2) apart.
1
1
0458-001-9621-B