Fitting, Removing Spray Lance; Fitting, Removing High-Pressure Hose - Stihl RE 271 Gebrauchsanleitung

English
Screw the cap with the intake hose
N
onto the detergent tank
Machines with hose reel
Engage crank handle in hose reel
N
34

Fitting, removing spray lance

1
Pull back and hold the coupling (1)
N
Push the spray lance (2) into the
N
mount on the spray gun, or pull it out
to remove the spray gun,
respectively
Release the coupling (1)
N
Fitting, removing high-
pressure hose
Machine without hose reel
Connecting the high-pressure hose
2
2
Push high-pressure hose onto the
N
connector (1)
Attach union nut (2) and screw it on
N
and tighten by hand
Disconnecting the high-pressure hose
Unscrew the union nut (2)
N
Pull high-pressure hose off of
N
connector (1)
Machine with hose reel
The high-pressure hose is already
connected.
RE 271, RE 271 PLUS, RE 281, RE 281 PLUS
1