Cleaning The Housing - VHF S5 Originalbetriebsanleitung

S5 – Maintenance and do-it-yourself
A strongly contaminated cartridge can lead to a
pressure loss.
If the compressed air fulfills the requirements for air
purity according to ISO 8573-1, the filter cartridge
usually does not have to be changed.
If the filter cartridge is contaminated, check the pur-
ity of your compressed air.
You exchange or clean the filter cartridge as follows:
1. Disconnect the machine from the compressed air
supply.
2. To remove the bowl of the water separator, do the
following:
a. Press the release and turn the bowl coun-
terclockwise as far as it will go.
b. Pull the bowl off the housing.
F . 63
IG
3. Unscrew the filter screw below the filter cartridge.
4. Pull out the filter cartridge and clean it if necessary.
A new filter cartridge is available as spare
part from customer service.
5. Insert the new or cleaned filter cartridge and reas-
semble the water separator. While doing so, insert
the release into the recess in the housing and turn
the bowl until it locks into place.

8.10 Cleaning the housing

cleaning agent
If you use an unsuitable cleaning agent and/or cleaning
tool for cleaning the machine housing, the surface or
the adhesive foil can get damaged.
1. Clean the surface with a dry microfiber cloth.
2. If some dirt cannot be removed this way, moisten
Original Operating Instructions: S5
Version: 12/15/2021
Damaging of the housing
NOTICE
when using an unsuitable
To avoid scratches, only use a microfiber cloth to
clean the housing.
Take care of the adhesive symbols so that they do
not peel off. The adhesive foil is especially sensitive
to rubbing and strong cleaning agents.
If the usage of a special cleaning agent is necessary
to eliminate certain dirt, we recommend checking
the suitability of the cleaning agent at a hidden
place of the part first.
the cloth. Use a pH neutral cleaning agent if neces-
sary.
EN 49