Switching Off The Machine; Mounting & Removing Blanks - VHF S5 Originalbetriebsanleitung

S5 – Operation: Preparing jobs
7. Confirm the current message.
The machine is ready for operation.
6.3 Sw itching off the machine
Danger of an electric shock if
DANGER
unplugging the power cable
before switching off the machine
If you unplug the power cable while the main power
switch is still in "ON" position, residual voltage in the
power cable may cause you to suffer from an electric
shock.
Before unplugging the power cable, switch off the
machine at the main power switch.
To switch off the machine, do the following:
1. Ensure that the working chamber is clean.
2. Switch off the machine at the main power switch.
3. (Optional) Unplug the power cable.
4. (Optional) Switch off the main power switch of
your workstation / facility.
6.4 Mounting & removing blanks
The machine can process the following blanks:
Discs with a diameter of 98.5 mm – 98.8 mm
n
Blocks, max. size: 45 x 20 x 20 mm (L/D/H)
n
Prefabricated abutments
n
requires extra equipment
*
You can obtain extra equipment from customer
service.
Tools used for cobalt-chrome blanks are shorter
than tools for other materials. Only cobalt-
chrome blanks with a maximum thickness of
18 mm can be machined.
How to mount the different blank types
Holder
Blank type
required?
Discs No
Blocks Yes
Prefabricated Yes
abutments
*
*
How to mount
Discs >> Blank frame >>
*
Blank magazine
Blocks >> Block holder >>
Blank magazine
Prefabricated abutments
>> Prefabricated abut-
ment holder >> Blank
Original Operating Instructions: S5
Version: 12/15/2021
Holder
Blank type
required?
8 blank frames provided with the machine
*
EN 27
How to mount
frame >> Blank magazine
*