Blank Magazine; Cam Computer; Anti-Soiling Concept - VHF S5 Originalbetriebsanleitung

S5 – Machine overview

4.5 Blank magazine

The blank magazine is the part of the blank changer
where you equip the blanks that you want to machine.
The blank changer automatically loads and unloads the
blanks into and from the working chamber. The
machine can be equipped with up to 8 blanks.
The blank magazine door covers the blank magazine
and protects the user from injuries during operation.
The blank changer can only operate when the blank
magazine door is closed. You can open and close the
blank magazine door manually.
To open or close the blank magazine door, pull it
upwards or push it downwards with your hand. Use
the recessed grip of the door.
F . 5 B
IG LANK MAGAZINE DOOR

4.6 CAM computer

To operate the machine, you must use a computer
running Windows
designed software ("manufacturing software"). The
manufacturing software consists of the following
components:
To create and design the dental objects you also need
a CAD application (sold separately by specialist
dealers).

4.7 Anti-soiling concept

The anti-soling concept decreases the soiling and wear
of sensitive machine parts.
The anti-soiling concept does not replace the regular
cleaning of the machine. Without regular cleaning, the
machine life decreases significantly.
extraction system
When dry machining, an operational external air extrac-
tion system must be installed. Otherwise, the machine
will get soiled over time and become defective.
The anti-soiling concept consists of:
Dry machining
Wet machining
The cooling liquid keeps machining debris away from
sensitive machine parts.
Original Operating Instructions: S5
Version: 12/15/2021
("CAM computer") and specially
®
DENTALCAM ‒ A CAM application for creating
n
and calculating virtual blanks ("jobs").
DENTALCNC ‒ A CNC application for machining
n
jobs and maintaining the machine.
Machine damage when dry
NOTICE
machining without an air
Always use a correctly installed and operational
external air extraction system during dry machining.
The external air extraction system ‒ An
n
external suction unit creates a vacuum in the work-
ing chamber and extracts machining debris from
it.
n Air that is emitted into the working cham-
ber ‒ Blows machining debris away from the
spindle and other machine parts.
The internal vacuum sensor ‒ Constantly
n
monitors the vacuum in the working chamber.
The ionizer ‒ The ionizer electrically discharges
n
machining debris of certain materials to reduce
their distribution in the working chamber.
EN 13