Working Chamber Door; Working Chamber - VHF S5 Originalbetriebsanleitung

EN 12

4.3 Working chamber door

The working chamber door locks the working chamber
and protects the user from injuries during operation.
You can open and close the working chamber door
manually.
You cannot open the door when the machine is
switched off or while the axes are moving.
To open or close the working chamber door, pull it
upwards or push it downwards with your hand. Use
the recessed grip of the door.
F . 3 W
IG ORKING CHAMBER DOOR

4.4 Working chamber

You can mount blanks and insert tools into the working
chamber. This is where the blanks are processed.
F
IG
Colors of the working chamber lighting
The machine illuminates the working chamber in
different colors. The color will change depending on
the state of the machine. You will find the colors and
respective machine status in the following table:
White
Blue
Red
Original Operating Instructions: S5
Version: 12/15/2021
S5 – Machine overview
. 4 W
ORKING CHAMBER
1. Outlet for the cooling liquid / air extraction opening
2. Blank changer flap
3. Ionizer
4. Spindle
5. Blank holder; Rotational axis A; Rotational axis B
6. Measuring key with protective cage
7. Tool magazine
If the working chamber lighting is insufficient,
provide additional lighting.
Color
The machine is ready for operation.
You can open the working chamber door.
The machine is operating.
The working chamber door is locked.
A machine malfunction has occured.
The working chamber door is locked.
Status