Dmx Controlled Operation - EuroLite AKKU PLL-168 WW/CW Panel Bedienungsanleitung

Quick access via rotary dial:
The brightness and color temperature can be manually controlled via the rotary dials on the back of the
device (see Description of the device), thus providing quick access to the static settings.
PWM (Pulse-width modulation)
With this function the PWM frequency of the LEDs can be set to 900, 1500, 2500, 4000, 5000, 6000, 10000,
15000, 20000 or 25000 Hz.
1 Press the MENU button repeatedly until rEFr is indicated in the display. Confirm with the ENTER button.
2 Use the buttons UP and DOWN to choose the desired setting and confirm with the ENTER button.

DMX controlled operation

Setting the number of DMX channels and the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with 6 control channels.
However, it can also be switched to a mode with 2 or 4 channels if different functions are required. To be
able to operate the device with a DMX controller, the DMX starting address must be set. The starting
address depends upon which DMX controller is being used. Please refer to the controller's documentation.
1 Press the MENU button so many times until Addr is indicated in the display. Confirm with the ENTER
button.
2 The display indicates 2 CH (2 DMX channels), 4 CH (4 DMX channels) or 6 CH (6 DMX channels). Use
the buttons UP and DOWN to select the desired DMX channel mode. Confirm with the ENTER button.
3 Now the display indicates the menu item for the DMX start address d***. Use the buttons UP and DOWN
to set the address. Confirm with the ENTER button.
4 The display will not flash when DMX signals are being received. If no control signals are available, the
display will flash.
Note: Please make sure that you do not have any overlapping channels in order to control each device
correctly and independently from any other fixture on the DMX chain. If several devices are defined to the
same address, they will work synchronously.
Functions in DMX mode
2-Channel-mode
Channel
CH 1
Warm white
CH 2
Cold white
4-Channel-mode
Channel
CH 1
Warm white
CH 2
Cold white
CH 3
Master-Dimmer
CH 4
Strobe
Value
000 – 255 Intensity (0-100%)
000 – 255 Intensity (0-100%)
Value
000 – 255 Intensity (0-100%)
000 – 255 Intensity (0-100%)
000 – 255 Total brightness (0-100%)
000 – 009 No function
010 – 255 Strobe with increasing speed (0-100%)
31/36
Function
Function
00137990.DOCX, Version 1.0