Stand-Alone Mode - EuroLite AKKU PLL-168 WW/CW Panel Bedienungsanleitung

Stand-alone mode

Preset colors
In the Stat mode the device will constantly emit one of 3 preset white colors.
1 Press the MENU button so many times until Stat is indicated in the display. Confirm with the ENTER
button.
2 Use the buttons UP and DOWN to set the desired color (S01~S03). Confirm with the ENTER button.
Automatic mode
In automatic mode, 3 show programs are available that run at an adjustable speed.
1 Press the MENU button so many times until Auto is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to select the desired show program (Au01~Au03). Confirm with
the ENTER button.
2 Press the MENU button so many times until SPEE is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to adjust the running speed of the program from SP 1 (slow) to
SP 9 (fast). Confirm with the ENTER button.
Sound control
Via the integrated microphone the unit can perfectly reproduce the show programs to the rhythm of the
music (sufficient bass provided).
1 Press the MENU button so many times until Soun is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to select the desired show program (So01~So03). Confirm with
the ENTER button.
2 Press the MENU button so many times until SPEE is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to adjust the running speed of the program from SP 1 (slow) to
SP 9 (fast). Confirm with the ENTER button.
3 Press the MENU button so many times until SEnS is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to Adjust the microphone sensitivity to the volume of the music
(SE 1 = low, SE 9 = high).
4 If you enable the silent scene mode (on setting) in menu item SILE, the LEDs will switch off if the volume
is too low or if there is no sufficient bass beat. If you disable this mode (off setting) the LEDs remain on
during periods without music.
White color setting
In the color mode Colo the warm white and cold white LEDs can be individually adjusted for intensity. The
device will constantly emit the set color.
1 Press the MENU so many times until Colo is indicated in the display. Confirm with the ENTER button.
2 Now the display indicates the letter W for the warm white color and the corresponding intensity value.
Use the buttons UP and DOWN to adjust the desired value.
3 Confirm with the ENTER button. Now the cold white color can be adjusted.
Color Temperature
In the color mode Temp the desired color temperature of the LEDs can be set. The device will constantly
emit the set color temperature.
1 Press the MENU button so many times until Temp is indicated in the display. Confirm with the ENTER
button.
2 Use the buttons UP and DOWN to set the desired color temperature (2800K-6500K). Confirm with the
ENTER button.
29/36 00137990.DOCX, Version 1.0