Operation; Menu Structure - EuroLite AKKU PLL-168 WW/CW Panel Bedienungsanleitung

OPERATION

Turn on the device. The display indicates the last operating mode. The operating modes can be selected by
means of the display and the control buttons. All settings remain stored even if the device is disconnected
from the mains. The device can be operated in stand-alone mode via the control board or in DMX-controlled
mode via any commercial DMX controller and via QuickDMX with the optionally available EUROLITE
QuickDMX USB Wireless Transmitter/Receiver.
The device is additionally equipped with two rotary dials. The use of these rotary dials is possible as long as
there is no DMX signal at the DMX input.

Menu structure

Press the MENU button so many times until the desired function is indicated on the display. Use the ENTER
button to select the function. With the buttons UP and DOWN you can select the mode or change values.
Confirm with ENTER.
Mode
DMX mode
White color presets
Automatic mode
Sound control
Running speed in
automatic and sound-
controlled mode
Microphone sensitivity
for sound control
White color setting
Color temperature
Dimmer
Strobe
Sound control
„silent scene"
Behaviour in case of
missing DMX signal
Slave mode
Energy saving mode
Potentiometer
PWM frequency setting
Firmware version
*
= See Color temperature settings in 6-Channel-mode CH 6
Display
6CH d001-507
Addr 4CH d001-509
2CH
d001-511
Stat S 01 – S 03
Auto Au01 – Au03
Soun So01 – So03
SPEE SP1 – SP9
SEnS SE1 – SE9
U000 - U255
Colo
C000 - C255
Temp 2800K-6500K
diMM dI1 - dI9
FLAS 0 - 9
on
SILE
oFF
bLac
HoLd
LoSt FuLL
Stat
Auto
SLAV SLAU
SuPE
norM
batt
Econ
on
PotE
oFF
0.9, 1.5, 2.5, 4, 5, 6, 10,
rEFr
15, 20, 25kHz
Vx.x Vx.x
28/36
Function
6-channel mode and start address
4-channel mode and start address
2-channel mode and start address
Constant lighting in one of 3 preset
colors
Automatic programs
Sound-controlled programs
Program running speed slow > fast
Microphone sensitivity low > high
Warm white 0-100%
Cold white 0-100%
Color temperature setting
Total brightness (Stat, Auto, Soun and
Colo modes) dark > bright
Strobe effect slow > fast
LEDs off if there is no music signal
LEDs remain on if there is no music signal
LEDs go off
Spot holds the last received signal
All LEDs 100% on
Pre-selected static color 01-03
Pre-selected auto program 01-03
Slave mode
Extra bright operating mode
Normal operating mode
Energy saving mode
Function for rotary dials activated
Function for rotary dials deactivated
PWM frequency
(pulse-width modulation)
Current software version
00137990.DOCX, Version 1.0
*