Precautions Against Kickback; Operational Safety Instructions For The Strimmer - FLORABEST FBK 4 B2 Originalbetriebsanleitung

Precautions against kickback

CAUTION KICKBACK!
► Be aware of the danger of kickback when working with the appliance.
There is a risk of personal injury. You can avoid kickbacks by being
careful and using the correct sawing technique.
■ Contact with the tip of the rail can, in some cases, lead to an unexpected
rearwards reaction resulting in the guide rail flying upwards towards
the operator (see Fig. A).
GB
Bild 1
Fig. A
■ Kickbacks can occur if the tip of the guide rail touches an object or if
the wood bends and the saw chain gets caught in the cut (see Fig. B).
Fig. B
■ If the saw chain jams in the upper edge of the guide rail, the rail can
kick back violently towards the operator.
■ Any such reaction can lead to you losing control over the saw and
possibly injuring yourself. Do not rely solely on the chainsaw's built-in
safety devices. As the user of a chainsaw, you can take a number
of measures to avoid accidents and injury. A kickback is caused by
incorrect use or misuse. It can be avoided by taking proper precautions
as given below.
■ Hold the saw firmly with both hands, with your thumb and fingers
around the handles of the chainsaw. Hold your body and arms in
a position in which you can withstand kickback forces. If suitable
measures are taken, the operator can control the recoil forces. Never
let go of the chainsaw.
■ Avoid an abnormal posture and do not saw above shoulder height.
This will prevent inadvertent contact with the tip of the rail and allows a
better control of the chainsaw in unexpected situations.
■ Always use the replacement rails and saw chains specified by the
manufacturer. Incorrect replacement rails and saw chains can lead to
a tearing of the saw chain and/or kickback.
■
Follow the manufacturer's instructions for sharpening and mainten-
ance of the saw chain. Setting the depth stop too low can increase the
risk of kickback.
■ Do not saw with the tip of the blade. This can lead to kickback.
■
Ensure that there are no objects on the ground that you can trip
over.

Operational safety instructions for the strimmer

Preparation
■ Wear close-fitting clothes that offer good protection, such as long
trousers, sturdy work shoes, heavy-duty protective gloves, a hard hat,
a protective mask for your face or safety goggles to protect your eyes
and good ear plugs or some other hearing protection against noise.
■ Always use the enclosed shoulder strap.
62
■ Always ensure that the handles are dry and clean and that no petrol
mixture is present.
■ Before working, check the area for objects such as pieces of metal,
bottles, stones, etc, which could get thrown up and cause injuries to the
user.
■ Before starting the engine, make sure that the strimmer is not in contact
with any obstacles.
■ Do not use the appliance until you have familiarised yourself with its
use.
Electrical safety
■ Never use the appliance near highly flammable liquids or gases, either in
closed rooms or in the open. This may result in explosions and/or fire.
■ Do not work with a damaged or incomplete appliance or an appli-
ance that has been modified without the consent of the manufacturer.
Never use the unit with defective protective equipment. Do not use the
appliance if it has a defective on/off switch. If the appliance has been
dropped, check for significant damage or defects.
Personal safety
■ This appliance may only be operated, adjusted and maintained by
appropriately trained individuals and adults.
■ If you are not familiar with the appliance, practice handling the appliance
while the engine is off.
■ Do not touch the exhaust.
■ Do not operate the appliance under the influence of alcohol or drugs.
■ Always hold the appliance with both hands. Your thumbs and fingers
should encircle the handles.
■ Work posture: Do not operate the appliance in an uncomfortable
position, when you are unbalanced, with arms fully stretched or with
only one hand.
■ Always ensure that you have a solid and firm stance.
■ Do not use the appliance if spectators or animals are in the direct vicin-
ity. Maintain a minimum distance of 15 metres between the operator
and other people or animals when trimming. Maintain a minimum dis-
tance of 30 metres between the operator and other persons or animals
when mowing down to the ground.
■ When mowing on a slope, always stand at a lower level than the
cutting tool. Never cut or trim on an icy, slippery hill or slope.
■ Any modifications to the product may risk personal safety and void the
manufacturer's warranty.
■ Children should be supervised to ensure that they do not play with the
appliance.
■ Do not use the appliance if it is damaged or if there are visible defects.
Use and handling
■ Use the appliance only for its intended purpose: cutting grass, mowing,
pruning branches, cutting and trimming hedges and bushes.
■ Do not use the appliance for extended periods; take regular breaks.
■ Ensure that screws and connecting elements are firmly tightened. Never
operate the appliance if it is not correctly adjusted, incomplete or if it is
not properly assembled.
■ Open the fuel tank slowly in order to allow any pressure which may have
built up in the tank to dissipate. To prevent the risk of fire, move at least 3
metres away from the refuelling area before starting the appliance.
■ Guide the strimmer to the desired height. Avoid contact with small
objects (e.g. stones) when using the strimmer.
■ Always hold the strimmer on the ground when the appliance is in
operation.
■ Do not use the appliance unless the appropriate protective guard has
been installed and is in good condition.
■ Do not use any other cutting tools. For your safety, only use the
accessories and additional devices that are indicated in the operating
instructions. The use of parts other than those recommended in the
operating instructions, or other accessories, can put you at risk of injury.
FBK 4 B2