FLORABEST FBK 4 B2 Originalbetriebsanleitung Seite 64

Push the primer 6 times
Mixing ratio: 40 parts petrol to 1 part oil
Petrol: ROZ 95 / ROZ 98
2-stroke engine oil: ISO - L - EGD / JASO FD
Explanation of the symbols on the hedge trimmer:
Risk of fatal electrical shock! Keep at least 10 m away from
overhead power lines!
Caution! Falling objects.
Especially when cutting above head height.
Caution! Risk of injury due to running blades!
Keep a safe distance away!
General warning!
1. Slide the tab on the front boom all the way into the
groove of the boom of the motor unit.
2. Must properly inserted the red line be flush with the
boom of the motor unit.
3. If this is not possible, pull the starter pull cord to adjust
the shaft.
Caution! Switch the on/off switch
Explanation of the symbols on the pole pruner!
Risk of fatal electrical shock! Keep at least 10 m away from
overhead power lines!
Protect the appliance from rain and moisture!
Caution! Falling objects.
Especially when cutting above head height.
Caution! Risk of injury due to running blades!
General warning!
1. Slide the tab on the front boom all the way into the
groove of the boom of the motor unit.
2. Must properly inserted the red line be flush with the
boom of the motor unit.
3. If this is not possible, pull the starter pull cord to adjust
the shaft.
Caution! Switch the on/off switch
FBK 4 B2
Explanation of the symbols on the strimmer/cutting blade
attachment!
20 h
to "0".
to "0".
Caution! Left-hand thread.
Protect the appliance from rain and moisture!
Beware of flung objects!
Beware of recoil!
Attention! Risk of injury from rotating cutting blade!
Keep hands and feet away!
Attention – petrol is highly flammable!
Risk of explosion! Do not spill fuel!
Turn the appliance off and disconnect the spark plug before
performing any maintenance work!
Caution! Risk of suffocation!
Attention! Poisonous CO vapours (carbon monoxide vapours)!
Do not use the appliance in closed rooms!
Warning! Do not use circular saw blades for the cutting
blade function.
Add a little grease after every 20 hours of operation
(gear grease)
A distance of 15 metres must be maintained between the
machine and third parties!
The cutting tool continues running after it is turned off
(cutting blade/cutting Strimmer cord)!
Important, hot parts. Keep a safe distance away!
Sound power level LWA data in dB.
Fire, naked flames and smoking are prohibited!
1. Slide the tab on the front boom all the way into the
groove of the boom of the motor unit.
2. Must properly inserted the red line be flush with the
boom of the motor unit.
3. If this is not possible, pull the starter pull cord to adjust
the shaft.
Caution! Switch the on/off switch
GB
to "0".
59