Basic Principles; Insert Jaws - Rohm DURO-M Originalbetriebsanleitung

6.1

Basic Principles

The procedure for determining the clamping force and speed is given in the
document "RÖHM Standard RN 1391 - General Information and
Guidelines for the Use of Power-Operated Clamping Devices").
This document can either be requested from RÖHM or viewed/downloaded
at www.roehm.biz/en/services/operating-instructions/ → General free of
charge.
6.2

Insert jaws

Turning the wrench, insert the jaws into the respective guide one after the
other:
§ cleaned.
§ Guide smeared with a brush.
§ Jaws are intact.
1. Insert the wrench into the drive.
B1385260 DURO-M
Operation of the lathe chuck | 6
EN
89 / 280