Mounting The Lathe Chuck - Rohm DURO-M Originalbetriebsanleitung

5 | Mounting the lathe chuck

5 Mounting the lathe chuck
80 / 280
Injuries due to insufficient securing on assembly, incorrect
tightening torque of the screws.
Crushing due to falling of the Lathe chuck.
Ø Use tapped holes for transport purposes.
Ø Observe tightening torque of the screws.
Ø Wear personal protective equipment.
Crushing injuries and cuts due to start-up of the machine dur-
ing set-up work.
Flying parts may cause serious injuries.
Ø Disconnect the power supply before assembly.
Ø Protect the machine against being re-started.
Ø Wear personal protective equipment.
WARNING
WARNING
B1385260 DURO-M