poolstar POOLEX NANO ACTION Installations- Und Gebrauchsanleitung Seite 170

Step7. Disconnect the hose and drainage valve connector when finished.
Step8. Replace the out drain plug on the inside of the pool.
Step9. Be sure that the pool liner is completely dry before folding the pool for
long-term storage. Leaving the pool exposed to sunlight for a few hours will clean
and speed the drying process and make it easier to fold the pool for storage. (Never
attempt to fold or stow a pool that is not completely dry as this could lead to a
proliferation of mold or mildew build-up during the time the pool is in storage.)
Step10. Remember, proper off-season storage is critical to protect your investment in
your pool.(espeically in winter) Once drained and dry, your pool should be carefully
folded and wrapped in a ground cloth (if available) or other similar protective tarp-
like material. The pool and all applicable accessories such as the pump, cover, ground
cloth, ladder, hoses, clamps, and hardware should be kept together and stored
indoors, in a reasonably warm, dry and weatherproof location.
7.1 Folding instruction
Before folding, it's better to dry all parts and pool completely by lying them
in the sun for one hour or so.(PIC.1). And then, spread some talcum powder
to prevent the vinyl from sticking together.
Step1. Please fold the protrusion sides inside to gain rectangle shape. (PIC.2).
Step2. Fold each half of the rectangle to gain a smaller rectangle shape. (PIC.3).
Step3. Fold each ends backwards. (PIC.4).
Step4. Fold the rest ends together to create an ultimate rectangle one. (PIC.5).
TIPS1. Please remove air inside to make the folded pool thin and flat during each
folding.
TIPS2. The original packing can be used for storage.
PIC.1
PIC.5
PIC.2 PIC.3 PIC.4
14
MSP-30100-V03