Heating Mode - poolstar POOLEX NANO ACTION Installations- Und Gebrauchsanleitung

4. Use
4.2

Heating Mode

WARNING: Before starting, ensure that the filtration pump is operating correctly.
Step 1 : Press to switch on your pump.
Step 2 : Using buttons
and select the required temperature.
EXAMPLE:
If the current temperature is 15°C, default setting temperature is 27° required temperature is 30°C.
Current water Required
temperature temperature
Useful information about how the heating mode operates
When the incoming water temperature is less than or equal to the required temperature (setpoint
temperature) -X°C, the heat pump will switch to heating mode. The compressor will stop when the
temperature of the incoming water is greater than or equal to the required temperature (setpoint
temperature).
Indicators for adjustment range X and Y
X : adjustable parameter from 1° to 15°C, default setting is 3°C. (Parameter N°6)
EN | 15