Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.3
Fitting the inlet baffle
Push the DN 110 pipe section (length 150 mm)
from the outside inwards through one of the upper
openings of the tank dome.
4.4
Fitting Securix filter
①
Mount the double sleeve ② on the outlet connec-
tion of the Securix filter ①. Assemble reduction
③ and DN 75 pipe section④ as shown in the
drawing. Secure all sleeve connections with Spax
screws.
4. Assembly
②
③
④
Insert the inlet baffle, consisting of a T-piece ①,
pipe section ② and a 90° bend ③ onto the inlet
pipe.
The lower outlet of the inlet baffle must point into
the tank (direction of arrow)! All sleeve connections
must be secured with Spax screws.
Insert the Securix filter through the installed DN 75
seal from the inside out.
20 / 52
①
②
③
Werbung
Inhaltsverzeichnis
