Märklin Central Station 3 Bedienungsanleitung Seite 42

Table of Contents
Setting Up and Starting
Basic Functions and Connections
Operating | Getting Started Quickly
Importing CS2 Data | Updating the CS3
Introduction | Technical Data
Running Locomotives
Selecting and Running Locomotives
Locomotive List: Sorting and Searching for Locomotives
Adding Locomotives Manually
Editing Locomotive Settings | Locomotive Card
Configuration | Changing CV Values
Editing the Item List
Adding Solenoid Items
Discover for mfx Items
Searching for and Sorting Solenoid Items
Editing the Track Diagram Control Screen
Setting up the Track Diagram Control Screen
Rotation Mode
Connecting Mode
Item and Location Selection
Creating an Area | Moving and Copying a Selection onto a TDCB Section
Switching Turnouts and Signals
Creating and Editing Events
Adding Events | Automating Procedures
Sorting | Using the Recording Function
Programming Locomotive Procedures | Control Using Feedback Contacts 30
System Settings
Calling up and Changing System Settings
Update by USB Stick
SD Card: Expanding the Internal Memory
Importing Locomotive Images Using the Web Browser
Appendix
Available Function Pictograms
System Architecture: CS3 and CS3 plus
Setting Up and Starting
The following components are required to get started
2
4
60061/60065 switched mode power pack (60 VA; for Märklin H0, Trix H0, and Minitrix) or 60101 or 51095 switched
5
mode power packs (100 VA; for Märklin 1 Gauge and LGB), Central Station 3, track feeder wires, track layout,
6
locomotives and cars, and/or solenoid items.
7
Only the switched mode power packs listed above can be used with the CS3. Transformers are no longer
8 allowed.
9
Connect the components as shown in the following illustrations. First, connect the Central Station to the model
10
railroad layout, then connect the switched mode power pack and finally plug the latter into a wall outlet.
11
12
13
15
16
19
19
20
21
Connections for power supply
Central Station
22
23
25
26
26
27
28
29
31
32
35
35
35
36
37
2