Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Notes; Safety Notes - Märklin Central Station 3 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Central Station 3:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Overview of the Technical Data for the Central Station 3 plus and Central Station 3
Introduction
Faster, easier, and still more user friendly: The new Central Station 3 offers model railroaders not only the latest
technology for multi-train control, but an operator interface that enables intuitive control thanks to a modern
touchscreen. As with modern Smartphones and Tablets, the screen must only be touched more and parts of the
screen can be enlarged with the zoom function. For example, locomotives can be taken quickly and easily into a
locomotive controller or solenoid items can be taken into the track diagram control screen (Layout) with a wipe
of your finger (drag & drop).
For the first time Märklin is offering two versions of the control unit with the Central Station 3: the Central
Station 3 plus (item number 60216) and the Central Station 3 (item number 60226). Important: Operating both
devices is identical. The operating instructions before you therefore apply to both versions. The two versions
of the CS3 differ essentially in their hardware features:
Central Station 3 plus (60216): This version allows you to use several Central Stations in parallel. In addition, it
has its own S88 connection and thereby has a direct connection potential for the 60881 and 60882 feedback
modules.
Central Station 3 (60226): This version is ideal for layouts that are to be controlled only from a single central
control unit. S88 feedback modules can be connected to it by means of the Link S88 (60883).
An overview of the possible connections for these control units can be found on Pages 37 and 38.
You can be assured of trouble-free operation of this complex system only if you use tested and certified Märklin
system components. The use of other makes of products invalidates any manufacturer warranty from Märklin.
The operator is responsible for damages arising from the use of other makes of products.
Adhere to the technology and principles presented in this manual when making connections to or on the layout.
The use of other circuits can easily lead to damage to the electronic components. It is therefore best to refrain
from „expensive" experiments.
The Central Station is not a toy. Make sure that this device is also used by children only as a controller for model
railroading. We hope you will have hours of enjoyment using the Central Station on your model railroad layout.
Your Märklin Service Team

Safety Notes

• Only for operation in dry spaces.
• The LEDs in this device correspond to Laser Class
1 according to Standard EN 60825-1.
• This device can be used by children ages 8 and
above and by people with limited physical,
sensory, or mental abilities or a lack of experience
and/or knowledge, if they are supervised or if they
have been trained regarding safe use of the
device, and if they have understood the dangers
resulting from it. Children may not play with this
device. Children must be supervised if they are
going to clean or give the device user service.
• Voltage supply: Use only with the Märklin switched
mode power packs for 60 watts (60061/60065),
Märklin power packs for 100 watts (60101), or LGB
power packs for 100 watts (51095).
• Pay attention to the notes in this manual about the
switched mode power pack being used.
• Use a moist cloth for cleaning this device. Do not
use solvents or cleaning agents. The power to this
device must be turned off (no voltage present)
when you are cleaning it.
• Pay attention to the instructions for this unit.

Technical Notes

• The device before you is a digital controller for
operating today's model railroads with Märklin
Digital, Märklin Systems, Märklin MM, or DCC.
• An SD memory card up to 32 GB can be used to
expand the internal memory.
• A mouse, keyboard, or a memory stick can be
plugged directly into the two USB sockets or by
means of a USB hub.
• The USB charging socket is designed for supplying
power to a Tablet/WLAN router (max. load of 1 amp).
Limitations of the 60226 Central Station
Since the 60226 Central Station does not have a
Märklin CAN Bus input, it cannot be used in Master/
Slave operation as a slave. This Central Station has a
second connection for a Märklin device in place of the
Märklin CAN Bus input.
In addition, feedback modules can only be connected
by means of the Link S88 (60883). The S88 connection
on the underside of the Central Station is not present
on this unit.
Operating for the First Time
All you have to do is connect the track and the
switched mode power pack to the Central Station the
first time you operate it.
1. Connect the layout track and the programming
track, if present, to the Central Station.
2. Connect the Central Station to the switched mode
power pack.
3. Plug the switched mode power pack into the
nearest wall outlet of your household power system.
We recommend using a power strip that can be
turned on/off. We further recommend plugging all
of the switched mode power packs on the layout
into this power strip.
4. The Central Station will start automatically.
5. The first time you start the Central Station you can
do language settings and you will be guided
through the unit with the help of a Start assistant.
There are other assistants built into the unit that
will introduce you to the details of the Central
Station.
• Do not operate at an altitude over 2,000 meters /
6,500 feet.
• This device is to be powered only with SELV
(Safety Extra Low Voltage) corresponding to the
identification markings on the specification label.
Note: Pressing on the STOP button for a long time
(up to 10 seconds) allows you to do a forced shutoff of
the Central Station. Pressing on the STOP button again
will start the Central Station again.
Connections
Switched mode power pack
Track connection (max. 5 amps)
Programming track connection (max. 1.5 amps);
connections diagram same as for layout track
Märklin CAN Bus input
(6-pin; only on 60216)
Märklin device connection
(7-pin) for Booster (60175/60174), Adapter
6021 (60128), and Link S88 (60833)
Märklin CAN Bus output (9-pin)
USB: mouse, keyboard, memory, hub,
USB: only for charging
LAN, direct connection to a router
Line Out, connection for an active speaker
Connections on the underside of the device for
60881/60882 S88 decoders, (only on 60216)
7

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis