Herunterladen Inhalt Inhalt Diese Seite drucken

Adding Locomotives Manually - Märklin Central Station 3 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Central Station 3:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Adding Locomotives Manually

This is the way you add more locomotives:
Locomotives without an mfx decoder are added by hand. To do this simply tap on the large plus sign
at the end of the locomotive list. You can also tap on the tool symbol („Edit") in the locomotive list and
select „Add locomotive" in the menu that is turned on.
Step 1: Finding the locomotive in the database
The locomotive settings are turned
on, and the „Info" tab is active. All
settings are modified there (image
above). Always begin with the
database search for the desired
locomotive. To do this tap on the
lower edge on the symbol desig-
nated „Locomotive Database". A
search template will open (right
image).
Select a locomotive from the database
Abort
Search
Item-No.
Description
A keyboard is turned on with a tap of your finger on
the magnification lens. Here you enter the item num-
ber or the locomotive name: The system immediately
begins the search. Each additional symbol makes the
search results more exact. After that, you select the
locomotive being searched and confirm with „Ok".
Tip: It is best to do the search by means of the item
number, since this is straightforward.
Step 2: Adding a photo from the image database
In the search template tap on the
magnification lens, enter the locomotive
name, and select from the alternatives
offered. Confirm with „Ok" at the end.
Tip: You can also import your own locomotive images. Details on this can be found on Page 35.
Entering Locomotives without the Database: Completely Manual Entry
Ok
Einlesen: Luditia velestionsed
que quo omni quata dollaccum
et el et andebit litiunt eati vent
apid quiae quidesti dellab
You set the locomotive ad-
dress by taping on the minus
and plus signs. Important: If
the address appears in red, it
has already been taken. Then
simply tap on „plus" until the
color changes back to black.
Ordinarily the photo is also taken together with
the locomotive data from the database. If not,
the image database helps: You can open it with
a tap of your finger on the center of the screen.
If the locomotive is not in the
database, you can also enter
the key data by hand. At the end,
confirm with „Ok" in the upper
right corner.
Tap in the field „Locomotive
Name" in order to enter the
name. To the right of that you will
find the drop-down menu „Num-
ber of Functions" in which you
can set the number of functions
that can be occupied. How you
insert a photo is described above
on this page.
You determine the
maximum speed to be
displayed on the locomo-
tive controller in the field
„Speedometer".
You select the
decoder present in the drop-
down menu „Decoder Type".
11

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis