Inhaltsverzeichnis
Werbung
Original-Erklärung für den Einbau von unvollständigen Maschinen
DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY
LINAK A/S
Smedevænget 8
DK - 6430 Nordborg
Herewith declares that LINAK DESKLINE
®
products as characterized by the following models and types:
Control Boxes: CBD6Sa000b0A-c09 (Where -a: can be P, C or H, -b: can be 2, 3 or 4 and -c: can be 0 or
7)
Linear Actuators: LA31
Built in actuator(s): DB5, DB6, DB14,
Lifting Columns: DL1A, DL4S, DL2, DL5, DL6, DL7, DL8, DL9, DL10, DL11, DL12, DL14, DL15, DL16,
DL17, DL18, DL19, DL20, DL21
Desk Panels: DPA, DPB, DPH, DPF1K, DPF1M, DPF2K, DPF3K, DPF1C, DPF1D, DPF1U, DPF1W, DPF4T,
DPG1K, DPG1M, DPG1B, DPG1C, DPT, DP1V01, DP1CS, DP1K, DP1U, DP2K, DP3K, DPN, DPWA
Accessories:
DESK SENSOR 1, USB2LIN, DCConnector
BLE2LIN002, BLE2LIN003,
complies with the following parts of the Machinery Directive 2006/42/EC, ANNEX I, Essential health and
safety requirements relating to the design and construction of machinery:
1.1.2 a) Special use*
1.1.2 b) Selection of the most appropriate methods*
1.1.2 c) Foreseeable misuse*
1.1.2 d) Operator constrains due to the use of personal protective equipment*
1.1.3 Materials and products*
1.2.1 Safety and reliability of control systems
1.2.2 Control devices. Shape, readability, overview*
1.2.3 Starting*
1.2.4 Stopping*
1.5.1 Electricity supply
1.5.10 Radiation. EMC. Emission of electromagnetic radiation, X-rays, -rays*
1.5.11 External radiation*
*need to be further evaluated in the end product
We confirm that prior to market introduction the relevant technical documentation is compiled in
accordance with part B of Annex VII and the assembly instruction pursuant to Annex VI.
This documentation or part hereof will be transmitted by post or electronically to a reasoned request by
the national authorities.
The products mentioned in this document are to be combined for use in height adjustable furniture.
This partly completed machinery must not be put into service until the final machinery into
which it is to be incorporated has been declared in conformity with the provisions of the
Machinery Directive 2006/42/EC where appropriate.
Nordborg,
2020-10-28
Seite 7 von 32
Werbung
Inhaltsverzeichnis
