Calling Up The Station List; Saving Dab+ Stations; Selecting Programmed Stations; Deleting A Saved Memory Slot - TechniSat DIGITRADIO 650 Bedienungsanleitung

If stations are being broadcast on the selected frequency, this will be
indicated on the stability bar (see also Section 13.8). If these stations are not
currently included in your station list, they will now be stored there.

13.4 Calling up the station list

> You can use the station list to check and play back the stations found on the
device. To do this, press the  or  to call up the station list and highlight a
station.
> To select the highlighted station, press the OK key.
> Alternatively, you can press the MENU button and use  or  to select >
[Station list].

13.5 Saving DAB+ stations

The favourites memory can store up to 20 stations.
Stored stations are retained even in the event of a power cut.
> Play the station you want.
> Press one of the number keys 0 - 9 on the remote control and hold down
until [saved.] appears on the display. The numeric key 0 is the favourite
memory location 10.
> Saving more stations: Repeat the process.
Alternatively and for the memory locations 11 - 20:
> Hold down the FAV button, use the / buttons to select a favourites
location 1 - 20 and press the OK button.

13.6 Selecting programmed stations

> Briefly press the number key you want 0 - 9. If there is no station saved in
the selected programme slot, [Memory slot empty] appears. An asterisk in
the status bar indicates an active favorite station.
Alternatively:
> Briefly press the FAV button, use the / buttons to select a favourites
location 1 - 20 and press the OK button.

13.7 Deleting a saved memory slot

> Save a new station to the respective programme slot.

13.8 Signal strength

> Press the INFO button several times. The signal strength will be displayed.
> The bar modulation shows the current level.
DE
EN
FR
NL
67