Selecting The Station; Saving Dab+ Stations To A Memory Slot; Retrieving Dab+ Stations From A Memory Slot - TechniSat DIGITRADIO 4 C Bedienungsanleitung

Alternatively:
> Open the MENU > [Scan settings] > [Full scan] and press the OK button.
> [Scanning...] appears on the display.
During the scan, a progress bar and the number of stations found are
displayed.
If no station is detected, check the telescopic antenna and, if required, change
the installation location (Section 5.3.1/3.2.1).

7.2.2 Selecting the station

> By pressing the P+ or P- buttons, the station list can be called up and you can
switch between the available stations.
Depending on the setting under MENU > [Scan settings] > [Change Channel],
the OK button must then be pressed to play the selected channel (option:
Channel Change > List) or the channel is played automatically (Option:
Channel change > Channel).

7.2.3 Saving DAB+ stations to a memory slot

The programme memory can save up to 20 stations in the DAB+ range.
> First select the desired station (see section 7.2.2).
> In order to store this station in a memory slot, hold down the FAV button
while playing until [Save Prog.] appears on the display. Then use the  / 
buttons to select a station memory slot (1 - 20). Press the OK button to save.
> Repeat this process to save additional stations.
You can also save stations to one of the One-Touch buttons 1 - 3 on the
device, or 1 - 10 by holding down the corresponding button a little longer
(button 0 = 10). To save to memory slots 11 - 20, briefly press the Number
entry button (25) and then hold down the second number.

7.2.4 Retrieving DAB+ stations from a memory slot

> To retrieve a station that you have stored in the FAV memory slots, briefly
press the FAV button and select a station slot (1 - 20) using the  / 
buttons. Press the OK button to play the station.
If no station is saved in the selected station slot, [(empty)] appears on the
display.
DE
EN
FR
NL
PL
IT
59