Product Description And Specifications; Intended Use; Product Features - Bosch AdvancedGrind 18 Originalbetriebsanleitung

Additional safety information
Wear safety goggles.
The protective guard must not be used for
cutting. With a suitable adapter, the protective
guard can also be used for cutting.
Hold the power tool firmly with both hands
and make sure you have a stable footing. The
power tool can be more securely guided with
both hands.
For application tools with an internal thread, such as
u
brushes, attention must be paid to the max. thread
length of the grinding spindle. The spindle end must not
touch the base of the application tool.
Use suitable detectors to determine if there are hid-
u
den supply lines or contact the local utility company
for assistance. Contact with electric cables can cause
fire and electric shock. Damaging gas lines can lead to ex-
plosion. Breaking water pipes causes property damage.
Do not touch grinding and cutting discs until they have
u
cooled down. The discs can become very hot while work-
ing.
Release the On/Off switch and set it to the Off posi-
u
tion when the power supply is interrupted, e.g. when
the battery pack is removed. This prevents uncontrolled
restarting.
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
Store the application tools inside buildings, in a dry,
u
frost-free room at a uniform temperature.
Remove the application tools before transporting the
u
power tool. This will allow you to avoid damage.
Bonded cutting and grinding discs have an expiration
u
date, after which the discs must no longer be used.
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Bosch Power Tools
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended use

The power tool is intended for cutting and brushing metal
and stone as well as roughing metal. Make sure that the cor-
rect protective guard is used (see "Operation", page 25).
Sufficient dust extraction must be provided when cutting
stone.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
The power tool must not be used to grind stone materials
with diamond grinding heads.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Unlocking lever for protective guard
(2) Spindle lock button
(3) Direction of rotation arrow on housing
(4) On/off switch
(5) Battery charge indicator
a)
(6) Rechargeable battery
(7) Speed preselection thumbwheel
(8) Rechargeable Battery release button
(9) Standard auxiliary handle (insulated gripping sur-
a)
face)
(10) Vibration-damping auxiliary handle (insulated grip-
a)
ping surface)
(11) Protective guard for grinding
(12) Protective guard for cutting
(13) Cover for cutting
(14) Mounting flange with O‑ring
(15) Grinding disc
a)
(16) Cutting disc
a)
(17) Diamond cutting disc
(18) Clamping nut
(19) Quick-clamping nut with bar
(20) Two-pin spanner for clamping nut/round nut
(21) Handle (insulated gripping surface)
(22) Grinding spindle
a)
(23) Hand guard
a)
(24) Rubber sanding pad
a)
(25) Sanding sheet
English | 21
a)
a)
1 609 92A 75F | (15.02.2022)