Model Assembly - Modster HOBBY Arrows 50mm Viper Bedienungsanleitung

Model assembly

Installation of the horizontal stabilizer and pushrod
1.Apply foam-safe CA to the highlighted areas shown
below, then slide the horizontal stabilizer onto the fuse-
lage.
Installation of the main wing
1.Apply foam-safe CA to the highlighted areas
shown below, then attach the winglets to the
wing tips.
Required Adhesives:
Medium CA
Required Adhesives:
Medium CA
2.With the servo centered, attach the pushrod
clevis to the elevator control horn.
2.Attach the wing to the fuselage using the included
screws.
KA2.0*12mm