Kit Contents; Model Assembly - Modster HOBBY Arrows 1300mm Zivko Edge 540 Betriebsanleitung

Manual - Zivko Edge 540
Kit Content
Before assembly, please inspect the contents of the kit. The photo below details the contents
of the kit with labels. If any parts are missing or defective, please identify the name or part
number (refer to the spare parts list near the end of the manual) then contact your local shop.

Model assembly

Main wing installation
1. Slide the wing spar into the pass
through of fuselage as shown.
2. Connect the wing halves onto the
wing spar.
Vertical stabilizer installation
1. Install the vertical stabilizer to fuselage with glue.
18
3. Fit the wing halves into the fuselage
cutouts.
4. Secure the wing set using included
screws as shown.
www.modster.at