Kit Content; Model Assembly - Modster Hobby Arrows 2000mm SZD-54 Betriebsanleitung

Manual - SZD-54

Kit Content

Before assembly, please inspect the contents of the kit. The photo below details the contents
of the kit with labels. If any parts are missing or defective, please identify the name or part
number (refer to the spare parts list near the end of the manual) then contact your local shop.

Model assembly

Main wing installation
1. Rotate the threaded end of the spar
into the fuselage in the direction as
shown, then use the included metal
key to tighten.
Horizontal stabilizer installation
1. Slide the horizontal stablizer onto the fuselage as
shown until an audible "Click" is heard.
www.modster.at
2. Slide the wing halves onto the fuse-
lage until an audible "Click" is heard.
Pass the wires through fuselage
and connnect with the two Y cables
from aileron and flap.
17