Model Assembly; Wing Installation - Modster Hobby Arrows 1100mm F4U-4 Handbuch

Model assembly

Wing installation

1.Insert all leads on the wing into the fuselage via the fuselage passthrough. Attach the wing onto the fuselage and
ensure that the wires do not interfere with any of the servos.
2.Secure the wing to the fuselage with included screws as shown. Do not over tighten the screws.
Pitot tube installation
1.Carefully apply foam safe CA to the base of the shown
pocket and place the pitot tube into the pocket as shown.
04
Required Adhesives:
Medium CA
HKM3.0*40mm