Kit Contents; Model Assembly - Modster HOBBY Arrows 50mm Bae Hawk Betriebsanleitung

Kit Content
Before assembly, please inspect the contents of the kit. The photo below details the contents
of the kit with labels. If any parts are missing or defective, please identify the name or part
number (refer to the spare parts list near the end of the manual) then contact your local shop.

Model assembly

Main wing installation
2. Attach the wing to the fuselage using the
included screws.
Note: Do not overtighten the screws.
1. Install the wing onto the fuselage slot, with
Y-harnes going through the hole as shown.
Note: Do not squeeze the wire leads.