Aquastop Installation - Bosch Tronic 5000 Installations- Und Bedienungsanleitung

▶ Position the water inlet and outlet pipes into the sealing
membrane.
Fig. 29
Tronic 5000 – 6721830067 (2021/06)
Installation (only for approved contractors)
▶ Adjust the hydraulic block until it is firmly secured at the
back of the appliance.
Fig. 30
▶ Place the bonded washers onto the water connections.
▶ Tighten the water connections.
▶ Check if there are leaks.
5.8

Aquastop installation

Only for models with the Aquastop system (TR.001.A..)
Before connecting the water,
19