Reset Internal Counters; Connectivity; Customer Service; Installation (Only For Approved Contractors) - Bosch Tronic 5000 Installations- Und Bedienungsanleitung

▶ Clean the remains of dirt or limescale.
4.8

Reset internal counters

The appliance is capable of monitoring water and energy
consumption.
It is possible to reset the appliance's internal counters, for this:
▶ Remove the front fascia of the device.
Fig. 5
▶ Remove the cover using a suitable tool.
Fig. 6
Tronic 5000 – 6721830067 (2021/06)

Installation (only for approved contractors)

▶ Press and hold button [1].
The LED turns on, indicating the start of the reset
sequence.
Fig. 7
[1] Wi-Fi-pairing button
After the LED turns off,
▶ Release the button.
Internal counters have been reset.
The LED takes a few seconds to turn off.
4.9

Connectivity

This appliance supports Wi-Fi connectivity.
For more details on accessories available for this device, see
the device catalogue.

4.10 Customer Service

Whenever you contact the Customer Service Hotline, please
provide the serial number of the appliance (SNR/TTNR).
The serial number for the appliance can be found on the plate
inside of the front cover.
5 Installation (only for approved
contractors)
5.1

Important information

The installation, electrical connection and the initial
commissioning are operations that must be carried out by
qualified experts only.
11