Bosch Tronic 5000 Installations- Und Bedienungsanleitung Seite 18

Fig. 21
The opening of the cable conduit must fit the power cable
perfectly. If the cable conduit is damaged during assembly, the
holes must be covered in a watertight manner.
▶ The cable conduit must be cut according to the diameter of
the power cable.
Fig. 22
▶ Insert the connection cable at least 40 mm inside the
appliance, unless you are using the lower connection site
with individual cables.
Tronic 5000 – 6721830067 (2021/06)
Installation (only for approved contractors)
▶ Pass the power cable through the cable conduit, ensuring
tightness.
Fig. 23
▶ If the distance between the appliance and the wall is 2-
8 mm, the appliance must be levelled using the upper
mounting fixing.
Fig. 24
If the appliance is not perpendicular to the wall,
▶ Use spacers at the bottom to level the appliance.
17