Replacing The Top Burner Pilot Light Nozzle; Replacing Oven Burner Pilot Light Nozzle; Replacing Oven Burner Air Bushing - Angelo Po 1N1FAG - 1T1FAG Bedienshandbuch

REPLACING THE TOP BURNER PILOT LIGHT NOZZLE

To carry out this operation, proceed as follows.
Turn off the gas supply tap.
1)
Pull off the knob (A).
2)
Take out the screws (C) and take down the
3)
dashboard (B).
Svitare il raccordo (D).
4)
Remove the nozzle (E) and replace it with the
5)
one suitable for the type of gas in use (see
table at back of manual).
Retighten the union (D).
6)
Replace the control panel (B) and the knobs
7)
(A) on completion of the operation.

REPLACING OVEN BURNER PILOT LIGHT NOZZLE

To carry out this operation, proceed as follows.
Access the pilot light through the opening
1)
provided in the bottom of the appliance.
Unscrew the cap (B).
2)
Unscrew the nozzle (C) and replace it with
3)
the one suitable for the type of gas in use (see
table at back of manual).
Replace the cap (B).
4)
To carry out this operation, proceed as follows.
Turn off the gas supply tap.
1)
Take out the screws (B) and take down the
2)
dashboard (A).
Undo the screw (C).
3)
Extract the bushing (D) and replace it with
4)
the one suitable for the type of gas in use (see
table at back of manual).
Replace the control panel (A) on completion of
5)
the operation.
3319970_inst_GB_rev.1

REPLACING OVEN BURNER AIR BUSHING

A
B
A
- 17 -
D E
C
C
C
B
C
B
D
10
GB
ENGLISH