ABB FPTC-02 Benutzerhandbuch Seite 105

EU-TYPE EXAMINATION CERTIFICATE
1.
2. Equipment or Protective System Intended for use in Potentially explosive atmospheres
3.
EU-Type Examination Certificate Number:
4. Product: Thermal motor protection system for converter drive ACS880/ACS880LC series
Certified types: ACS880/ACS880LC +L537 +Q971 (FPTC-02)
ACS880/ACS880LC +L537 +Q971 +Q973 (FPTC-02 & FSO-12)
ACS880/ACS880LC +L537 +Q971 +Q972 (FPTC-02 & FSO-21)
ACS880/ACS880LC +L537 +Q971 +Q972 +L521 (FPTC-02 & FSO-21 & FSE-31)
5. Manufacturer: ABB Oy Drives
6. Address: Hiomotie 13, 00380 Helsinki, Finland
Additional manufacturing locations:
ABB AS, Drives, Aruküla tee 59, Rae vald, 75301 Harjumaa, Estonia
7. This product and any acceptable variation thereto is specified in the schedule to this certificate and the documents
therein referred to.
8. Eurofins Expert Services Oy, Notified Body number 0537, in accordance with Article 17 of Directive 2014/34/EU
of the European Parliament and of the Council, dated 26 February 2014, certifies that this product has been found
to comply with the Essential Health and Safety Requirements relating to the design and construction of products
intended for use in potentially explosive atmospheres given in Annex II to the Directive.
The examination and test results are recorded in confidential report No. EUFI29-20001227-T2.
9.
Compliance with the Essential Health and Safety Requirements has been assured by compliance with:
10. If the sign "X" is placed after the certificate number, it indicates that the product is subject to the Specific Conditions
of Use specified in the schedule to this certificate.
11. This EU-Type Examination Certificate relates only to the design and construction of the specified product. Further
requirements of the Directive apply to the manufacturing process and supply of this product. These are not covered
by this certificate.
12. The marking of the product shall include the following:
Espoo, 30.10.2020
Eurofins Expert Services Oy
Kari Koskela
Senior Expert
This document is digitally signed.
This certificate, including the schedule, may only be reproduced in its entirety and without any change.
Eurofins Expert Services Oy, Kivimiehentie 4, FI-02150 Espoo, Finland
Directive 2014/34/EU
EESF 20 ATEX 050
EN 50495:2010
II (2) GD
Jenni Hirvelä
Senior Expert
www.eurofins.fi/expertservices
Technische Daten 105
EESF 20 ATEX 050
Page 1 of 2