Scheppach 5807704903 Originalbetriebsanleitung Seite 16

13. Troubleshooting
Fault Possible cause
Check whether the plug is plugged in.
Check whether there is power to the
Motor does not run socket.
Check whether the vacuum cleaner
on/off switch is switched on.
Is the brush blocked?
Reduced vacuuming
power Is the dust bag full of dust?
Is the filter full of dust?
16 І 32 16 І 32
Remedy
Plug the mains plug back in to the socket.
Call an electrician.
Switch the on/off switch on.
Switch the vacuum cleaner off to remove the
blockages.
Remove and empty the dust bag.
Remove and empty the filter.