01.00 | ID no. 1399591 | Assembly and Operating Manual | en | 1399688
Loosen screws (2) and remove adapter plate (1).
Ø
Insert the cylindrical pin (1) into the ISO flange (4). Fasten the
Ø
adapter plate (2) to the ISO flange (4) with screws (3).
Notice! The adapter plate can be rotated around the
longitudinal axis in 90° steps to enable the optimum installation
position of the gripper unit.
The cylindrical pin (1) and the screws (3) are included in the
accessory pack.
Assembly
17