Protection During Handling And Assembly; Protection During Commissioning And Operation - SCHUNK EOA-DRM-PSH 22-1 Montage- Und Betriebsanleitung

Basic safety notes

2.12.1 Protection during handling and assembly

2.12.2 Protection during commissioning and operation

10
01.00 | ID no. 1399591 | Assembly and Operating Manual | en | 1399688
Incorrect handling and assembly
Incorrect handling and assembly may impair the product's safety
and cause serious injuries and considerable material damage.
• Have all work carried out by appropriately qualified personnel.
• For all work, secure the product against accidental operation.
• Observe the relevant accident prevention rules.
• Use suitable assembly and transport equipment and take
precautions to prevent jamming and crushing.
Incorrect lifting of loads
Falling loads may cause serious injuries and even death.
• Stand clear of suspended loads and do not step into their
swiveling range.
• Never move loads without supervision.
• Do not leave suspended loads unattended.
Falling or violently ejected components
Falling and violently ejected components can cause serious injuries
and even death.
• Take appropriate protective measures to secure the danger
zone.
• Never step into the danger zone during operation.