Button Lock - hanseatic HG6085C14T7635EI Gebrauchsanleitung

1. Press the button (11) in order to inter-
rupt the dishwashing programme.
The LED to the right of the programme
symbol will become a solid light.
2. Open the appliance door slightly and
wait until the spraying arm has come to a
standstill and the steam has dispersed.
3. Slowly open the appliance door all the way.
4. Add the dishes.
5. Close the dishwasher door.
6. Press the button (11) once again.
After approx. 10 seconds, the appliance
will continue the programme cycle.
A signal tone will sound at regular
intervals while the dishwashing pro-
gramme is paused.
Programme table

Button lock

(11)
(4)
The dishwasher buttons can be locked, e.g.
for childproofing purposes.
• To switch the button lock
– on, press the plus and minus buttons
/ (12) simultaneously and hold
them pressed in until the
tor (4) appears in the display.
The buttons are locked
– off, press both buttons again and hold in
until the
buttons are unlocked.
Page EN-25
(12)
indica-
in the display goes out. The